Andy ironing tips
How to take care of your Andy product
Andy is made from high-quality materials and designed to last over time. We advice the usage of deminarilzed water in order to prevent limescale.
- Use only tap water for both ironing and cleaning the board. Water treated with decalcification or cartridge filters is not suitable. It may be corrosive or carry particles that could damage the board.
- Perform the boiler cleaning periodically (once every three months), running clean water through two or three cycles as indicated on the usage manual.
- If you are using demineralized water, cleaning may be less frequent, but it must still be performed to keep the product in good condition
- Replace the ironing board cover if worn or damaged to maintain its proper functionality and safe use. We recommend using only original spare parts.
Get started with Andy: set up and first usage
Setting up Andy is very easy, and the ironing boards heats up within just one minute. Fill up the boiler and position all the components before turning on the board. When using it for the first time, let steam flow for few seconds before starting the ironing.
How does Andy hand-ironing works?
1. Set the Hand mode
To iron with hands, simply select the “Hand” function, put on the sating gloves, and lay out the garment on the suction and blowing ironing board.
2. Start the Thermal Technology
Activating the blowing fuction you will see steam rising from the ironing board. You can iron the garment opened up or already folded, depending on the size.
3. Glide over the fabric
Run your hands over the garment, and the wrinkles disappear effortlessly. The gentleness of this technique makes the Andy ironing board suitable for any type of fabric.
Sandwitch ironing: both sides in one touch
The Andy ironing board distributes steam and heat evenly across the surface, allowing for different ironing styles. Using double-sided steam ironing helps you easily smooth even the most delicate fabrics.
Andy Ironing modes using Mimo.
Ultra Dry
No steam, use just vacuum and warmth.
Deep
The ironing board vacuum ensures steady ironing.
Soft
The ironing board blows air for a softer touch.
Vertical Steamer
Mimo iron can be used as a vertical steamer too.
Ultra Dry ironing exploits the power of warmth
The heated ironing board in suction mode holds clothes in place and warms them evenly. Using the Mimo iron in this mode delivers precise, yet dry ironing results.
Soft ironing: use the air for gentle ironing
The blowing mode creates an air cushion beneath the fabric for gentler, yet dry ironing. Moreover, this function makes using the iron easier and prevents new wrinkles from forming.
Deep Ironing to iron thicker clother like a pro
Using the ironing board in suction mode with the steaming Mimo iron allows steam to penetrate the fabric fibers and dry them immediately after. It smooths out all wrinkles, leaving the fabric soft to the touch.
Did you know Mimo Iron can be used as steam iron too?
Mimo iron emits steam with a power of 500kW, making it perfect for vertical ironing as well. The base of the iron can be rotated 90° to use it directly on hanging clothes (or tents too!), providing precise results and immediate dryness.
